| This is a success story in full sized
glider, it won the 1995 Aerobatic World championship in France. It was designed
as a successor of the famous Kobuz 3 in Poland. It took only 7 months to
the designer and the manufacture to make the first flying prototype.
The model is a 1:2.75 scale semi-scale
reproduction of this famous Polish aerobatic sailplane. This model is built to the same
high quality standard featured in all ICARE kits. It carries the HQ1.5 airfoil, giving the
sailplane smooth, fast and versatile flying characteristics. It is fully aerobatic, has a
wide speed range, thermals well, and races well. At 5.5m wingspan, it features
the extended wing tips.
Four
servos will have to be fitted in the wings for the ailerons and
the airbrakes, two standard sized
servos will be used for the elevator and rudder which are respectively
actuated via a pushrod. A retract servo and a tow release might be
fitted in the nose for aero towing.
This all moulded kit is coming with a high
quality white epoxy Fiberglas fuselage, and has the square wing joiner carrying
tube installed. The fibreglass moulded, carbon reinforced wings are
finished, no additional work is required on the wings, except installing
the wing servo. The elevator is finished, the rudder is
finished too. A clear plastic canopy and a Fiberglas canopy tray is
supplied and has to be assembled. Only a few hours are required to
finish this glider. A hardware package is
completing the kit. |
Standard kit content:
- White epoxy glass fuselage with reinforcement installed
- Clear canopy and fibreglass frame
- All moulded wings, airbrakes installed, control surfaces
hinged
- Moulded tail units, rudder and elevator
- Hardware, short instructions, cnc vinyl cut decals set.
Deluxe kit content:
- White epoxy glass fuselage with reinforcement,
retractable landing gear, tail wheel, tow release installed.
- Clear canopy framed and fitted.
- Cockpit interior
- All moulded wings, airbrakes installed, control surfaces
hinged
- Moulded tail units, rudder and elevator
- cnc vinyl cut decals set
- Hardware, short instructions, protective wing bags.
Turbine version:
- Full carbon wings and fuselage
Standard Swift S-1, 4.66 - 5.5 m
all moulded kit,
price: U$ 2789.00, on sale at 2649.00 USD
Deluxe Swift S-1, 4.66 - 5.5 m all moulded ARF kit,
price: 4149.00 U$, on sale at 3949.00 USD
Deluxe all Carbon Swift S1, 4.66 - 5.5 m full carbon ARF kit, price:
4799.00 U$, on sale at 4499.00 USD
|
