Home
Back to category
Lunak LF-107 3.6m
Moswey 4
DG-800S 3.7-4.5m
ASH-26 4m
H-201 Standard Libelle
ASW-28 4m
Discus 2b/2bM 4m
Discus 2b 4m
Duo Discus T 4m
Nimbus 4D 4m
FOX 4.0m
Salto H101 4m
L23-Super Blanik
Windex 1200c 4.1m
ASW-28-18 4.1m
Ka6e 4.2m
Discus 4.3m
ASK-21 4.2m
Ka6e 4.2m
SB-9 (4.5m)
Salto H101 4.5m
Cirrus 4.5m
L213 A (4.6m)
DG-600 M 4-4.8m
Ventus 2cx 4.3m
Pilatus B4 4.5m
Lunak LF-107 4.75m
ASG 29-18 4.8m
Ventus 2cx 4.8m
ASW-28-18 5m
DFS-Habicht 3.8m
Minimoa 4.8m
DFS-Reiher 5.4m
KA 7 5.3m
ASW-22 BL 5.3m
Ventus 2ax 5m
Discus 2b/2c 5m
SB-14 5.14m
DG-600/16 Evo 5.13 m
Nimbus 4D/4DM 5.2m
Nimbus 4, 6m
DG-808B 6m
DG-600 5-5.6m
DG-1000/M 5.3m
DG-1000/M MK 5.3m
Duo DiscusX 5.3m
DG-800S 5-6m
Ventus 2c MK 5/6m
Ventus 2c SK 5/6m
ASK-21 6m
Duo Discus 6.06m
HpH 304 Shark  6m
ASG 29 6m
Ventus 2cx 6m
Swift S-1 5.5 m
SZD-59 6m
ASK-21 5.7m
ASG 29 5m
ASH-26/M MK 6m
Antares 20E 6.6m
Arcus 6.6m
ASH-25/Mi 6.6-6.9m
Nimbus 4D/DM 7m
Nimbus 4D/DM 7 m
Nimbus 4 10 m
DG-303 6.5m
Ventus 2cx 7.5m
ASH-31/Mi 7.2-8.4m
Duo-Discus X
Arcus 7.4m
Arcus 8m
ASG-29 9m
 

Lunak LF-107 4.75m

Specifications:

 
Scale: 1:3
Length 2.26m
Wing Span: 4.75 m (187")
Wing Area: 143 dm2 (2216 sq.in.) 
Wing Airfoil: RG 12 10%
Wing Loading: 83g/dm2 (27oz/sq.ft.) 
Flying Weight: 12-15 kg (26 lbs)
Radio: Standard radio
Mini servos for the wings
 

The Lunak was built in the early 50's, in the Czech Rep. It was used as a trainer for future jet pilots or in local clubs for sailing and aerobatics. It had very impressive flying characteristics with a win at the World Championship. Only 5 units are still inventoried around the world from over 200 built.

This Lunak is an all moulded reproduction of the original all wood construction. This model is obviously fully aerobatics and has nothing to envy to the later Swift of Fox, as it follows control input as precisely. With the adequate use of ailerons and flaps control you will have a very wide implementation range. But with is easy low speed handling, landing on a dime are common, while the airbrakes bring you down to the closest spot.

The plugs before moulding the moulds were fitted with tissue, to give the same texture as the original, then also fitted with the riveted metal tips, and access covers. This gives highly detailed parts once pulled out of the moulds. Wing joiner system is fitted with locating pins. Airbrakes are fitted as well. Servos well in the wings and elevator are ready to receive their servos. framed canopy is finished and ready to install. Who wants to make the canopy tilting or sliding, can do it with minimum effort.

The pictures shows a standard color combination. All parts come painted out of the moulds. But any other color scheme is available upon request.

Radio requirements are two mini servos for the ailerons, two mini servo for the flaps, two mini servos for the airbrakes, two regular servos for the elevator and rudder. And an additional servo for aerotow.

Lunak LF-107, 4.75m ARF all moulded kit, price: 2789.00U$

 

 
 

© Copyright 1997-2016 ICARE enr. All rights reserved.