Home
Back to category
ALES motor chart
EMA power pod
Manta-E
Bart XE
KalaŽ
Adriana
Gem
Avionik B-99
Avionik B-2000
Avionik B-2001
Avionik F5B-10 2000
Avionik F5B-7 2001
Alex F5B
Hawk F5B
mini-Hawk F5B
miniCorado F5B
Twister III F5B
Alex-E XXL
Capuccino
Alexis-VE and XE
Gladiator G2-E
Aspire Electro
Xplorer-E 3.5m
Xplorer-E 3.8m
Gracia/Grafas
Topaz SV2-E
Eraser XE
Soarmaster Compact
Magellan-E XL
Magellan-110
Avia
Magellan-E
Falcon-E
Koleos-E
Nelly-E
Mini Nyx-E
Moebius F5/3J mk2
Ocelot-e
Flash-Electro
Linea
Fantasy
 

Nelly-E

Specifications:

 
Wing Span: 1.8 m (71")
Wing Area: 30.8 dm2 (477 sq. in.)
Wing Airfoil: S7036mod.
Wing Loading: 19 g/dm2 (7.5 oz/sq. ft.)
Flying Weight: 560-680 g (19-24 oz)
Radio: Sub Micro servos and micro receiver recommended
Motor Compact 380

 

The Nelly-E electric motor glider is based on the same building technology then our well known Koleos. It features a similar moulded carbon D-box technology that made the Carbon D-light so successful. This type of construction results in a very strong, light wing and a very accurate airfoil shape over the leading edge - the most important part of the airfoil.

To reduce the overall weight, the Nelly-E fuselage consists of a Kevlar-carbon hybrid lay-up for the best weight to strength ratio. The fuselage has long tail moment that improves pitch dampening and responsiveness to control inputs. No space concern with this fuselage as it has plenty of room for any regular LiPo battery.

The low inertia of the wings allow the glider to react to the lightest lift. The low drag, hollow-molded tips are swept back to reduce the stall speed and curved up to reduce the turning radius. This, combined with an overall improvement in handling, results in a sailplane that will allow you to work small low-level thermals with confidence.

The Nelly-E is a perfect thermal duration glider, perfect for any 2 CH (RES) 400 class competition. It's simple design, allows even beginner to have a great performing glider.

All parts of the Nelly-E are pre-finished so very little time is required to get it into the air. The two-piece wing is completely finished and covered in Oracover Light, it holds together by means of a steel rod and against the fuselage with two bolts.  The Tail surfaces are moulded and very light. The fuselage comes complete with a trimmed canopy, wing hold down block and pushrods pre-installed. You will need two of your favorite sub-micro servos and a micro receiver. Then Choose one of these two power set ups: 

Nelly Electric, Poly-wing, V-tail, price: N/A
Nelly
Electric combo brushless setup with compact 380 motor, Easy 25, 7.5 x 4 fold prop assembly and a AP 800 3S1P:

 

 
Nelly E 1.8m

 
 

 
 

© Copyright 1997-2012 ICARE enr. All rights reserved.