Back to category
Lunak LF-107 3.6m
Moswey 4
DG-800S 3.7-4.5m
ASH-26 4m
H-201 Standard Libelle
ASW-28 4m
Discus 2b/2bM 4m
Discus 2b 4m
Duo Discus T 4m
Nimbus 4D 4m
FOX 4.0m
Salto H101 4m
L23-Super Blanik
Windex 1200c 4.1m
ASW-28-18 4.1m
Ka6e 4.2m
Discus 4.3m
ASK-21 4.2m
Ka6e 4.2m
SB-9 (4.5m)
Salto H101 4.5m
Cirrus 4.5m
L213 A (4.6m)
DG-600 M 4-4.8m
Ventus 2cx 4.3m
Pilatus B4 4.5m
Lunak LF-107 4.75m
ASG 29-18 4.8m
Ventus 2cx 4.8m
ASW-28-18 5m
DFS-Habicht 3.8m
Minimoa 4.8m
DFS-Reiher 5.4m
KA 7 5.3m
ASW-22 BL 5.3m
Ventus 2ax 5m
Discus 2b/2c 5m
SB-14 5.14m
DG-600/16 Evo 5.13 m
Nimbus 4D/4DM 5.2m
Nimbus 4, 6m
DG-808B 6m
DG-600 5-5.6m
DG-1000/M 5.3m
DG-1000/M MK 5.3m
Duo DiscusX 5.3m
DG-800S 5-6m
Ventus 2c MK 5/6m
Ventus 2c SK 5/6m
ASK-21 6m
Duo Discus 6.06m
HpH 304 Shark  6m
ASG 29 6m
Ventus 2cx 6m
Swift S-1 5.5 m
SZD-59 6m
ASK-21 5.7m
ASG 29 5m
ASH-26/M MK 6m
Antares 20E 6.6m
Arcus 6.6m
ASH-25/Mi 6.6-6.9m
Nimbus 4D/DM 7m
Nimbus 4D/DM 7 m
Nimbus 4 10 m
DG-303 6.5m
Ventus 2cx 7.5m
ASH-31/Mi 7.2-8.4m
Duo-Discus X
Arcus 7.4m
Arcus 8m
ASG-29 9m

Lunak LF-107 3.6m

Specifications:                                                    Hollow molded version!

Scale: 1:3.7
Wing Span: 3.6 m (143")
Wing Area:  
Wing Airfoil: HQ 1.5/12
Wing Loading:  
Flying Weight: 4.5 kg (159 oz)
Radio: Standard radio
Mini servos for the wings

The Lunak was built in the early 50's, in the Czech Rep. It was used as a trainer for future jet pilots or in local clubs for sailing and aerobatics. It had very impressive flying characteristics with a win at the World Championship. Only 5 units are still inventoried around the world from over 200 built.

This kit is the 1:4 scale reduction and is also the flapped version. This plane has a fixed wheel, prefitted and painted canopy tray for nice scale. The wings are hollow molded with lots of carbon reinforcement, which gives a safe feeling for those looking into pure aerobatics! Airbrake pocket are made and ready for installation, huge fiberglass wing joiner complete this rugged wing construction. The tail surfaces are partly hollow molded but reflect the structural construction of the original and though are also covered to close the open surfaces, the stabilizer is plug in like the wings. The fuselage is state of the art with some sort of honeycomb in the tail boom for increased stiffness, you get a great feel of solidity. All decals have already been applied.

Kit content is a yellow painted epoxy fuselage, finished yellow painted hollow molded wings, aileron and flaps are finished and ready to hinge, airbrakes pockets are made and ready for airbrake installation. Tail surfaces are molded finished build-up structure and covered with yellow Oracover®, all required accessories are supplied as well as short building instructions.

Radio requirements are two micro servos for the ailerons, two mini servo for the flaps, two micro servos for the airbrakes, two regular servos for the elevator and rudder. And an additional servo for aerotow.

Lunak ARF all molded kit, price: N/A U$


© Copyright 1997-2014 ICARE enr. All rights reserved.