Home
Back to category
Lunak LF-107 3.6m
Moswey 4
DG-800S 3.7-4.5m
ASH-26 4m
H-201 Standard Libelle
ASW-28 4m
Discus 2b/2bM 4m
Discus 2b 4m
Duo Discus T 4m
Nimbus 4D 4m
FOX 4.0m
Salto H101 4m
L23-Super Blanik
Windex 1200c 4.1m
ASW-28-18 4.1m
Ka6e 4.2m
Discus 4.3m
ASK-21 4.2m
Ka6e 4.2m
SB-9 (4.5m)
Salto H101 4.5m
Cirrus 4.5m
L213 A (4.6m)
DG-600 M 4-4.8m
Ventus 2cx 4.3m
Pilatus B4 4.5m
Lunak LF-107 4.75m
ASG 29-18 4.8m
Ventus 2cx 4.8m
ASW-28-18 5m
DFS-Habicht 3.8m
Minimoa 4.8m
DFS-Reiher 5.4m
KA 7 5.3m
ASW-22 BL 5.3m
Ventus 2ax 5m
Discus 2b/2c 5m
SB-14 5.14m
DG-600/16 Evo 5.13 m
Nimbus 4D/4DM 5.2m
Nimbus 4, 6m
DG-808B 6m
DG-600 5-5.6m
DG-1000/M 5.3m
DG-1000/M MK 5.3m
Duo DiscusX 5.3m
DG-800S 5-6m
Ventus 2c MK 5/6m
Ventus 2c SK 5/6m
ASK-21 6m
Duo Discus 6.06m
HpH 304 Shark  6m
ASG 29 6m
Ventus 2cx 6m
Swift S-1 5.5 m
SZD-59 6m
ASK-21 5.7m
ASG 29 5m
ASH-26/M MK 6m
Antares 20E 6.6m
Arcus 6.6m
ASH-25/Mi 6.6-6.9m
Nimbus 4D/DM 7m
Nimbus 4D/DM 7 m
Nimbus 4 10 m
DG-303 6.5m
Ventus 2cx 7.5m
ASH-31/Mi 7.2-8.4m
Duo-Discus X
Arcus 7.4m
Arcus 8m
ASG-29 9m
 

Ventus 2cx 6m

Specifications:

 
Wing Span: 5 and 6 m (236")
Length: 2.14 m (84")
Surface area: 125 dm2 (1938 po2)
Wing Airfoil: HQ 3/15-3/10
Flying Weight: 11.5 kg (25 lbs)
Radio: Standard radio.
Mini and micro servos for the wings.
 

The Ventus 2cx is a high performance open class (18 m) glider. We at ICARE are very proud to offer here a (1:3) super-scale reproduction of this very high performance glider.

With a span of 6 meters this 1:3 scale Ventus 2cx is a very fine scale gliders. The model has been made in version full fibreglass, and the wings has been made with a sandwich method and there has been used Herex. The cockpit comes finished with control columns, upholstered seats, and some scale details such as instrument mushrooms complete with instruments. All that remains for the builder to do is add a scale pilot for complete realism.

This glider comes completely built, and ready for radio installation. Only a few hours are required, before you go to the field. The moulded wings are made from carbon and kevlar components, a carbon and glass fibre strengtheners runs through the centre of the wings. Wings are coming with two sets of molded wingtips. Airbrakes are installed and ready to be connected by the mean of a mini servo. Ailerons and flaps are hinged ready to hook up. The high gloss, gel coated Fiberglas fuselage has the wing joiner carrying tubes, the rudder and elevator installed. The cockpit comes with all main components like the instrument mushrooms, seats, head rests done, it is the most detailed cockpit ever made. Canopy opens to the front like the full size. Landing retractable wheel comes with brakes are installed and ready to work, like the tow release. A small package hardware and short building instructions are completing the kit. If you would like to venture into large scale gliders this Ventus 2cx is a must!

Radio requirements are:

- Aero tow system: 1x standard servo.
-
Ailerons: 2x micro servo.
- Flaps: 4x micro servo.
- Airbrakes: 2x standard servo (for size of box).
- Rudder: 1x standard servo.
- Elevator: 1x standard servo.
- Landing gear: 1x standard servo.

Complete cockpit with scale outfit and painted instrument panel. A small package hardware, set of decals, and short building instructions are completing the kit.

Ventus 2cx, 5 and 6 m, ARF molded kit, price: 3499.00 U$

   
 
 
 

Copyright 1997-2014 ICARE enr. All rights reserved.