Back to category
Bart Xtreme/DS
Omer Xtreme/DS
Vikos F3F
Nyx F3F
Mini Nyx
The Bizz

Bart Xtreme/DS


Wing Span: 1.48 m (58")
Length: 1.36 m (53")
Wing Area: 23 dm2 (356 po2)
Wing Airfoil: HN-354
Wing Loading: 32 g/dm2 (10.5 oz/po2)
Flying Weight: 750 g - 1.5 kg (26 oz - 53 oz)
Radio: 10 mm Micro servos in the wings. Micro servos and radio in the fuselage.

The Bart Xtreme and DS is the new bad boy on the slope. This all moulded slope racer excels in the 60-inch class with it's ability to accelerate quickly, go fast and retain energy in the turns. Although the Bart Xtreme excels at racing, it's docile handling allows the intermediate flyer to relax and have fun on the slope, just going fast, or performing the full range of aerobatics. It features state of the art construction with all flying surfaces being hollow core moulded. It sports a radical elliptical wing plan form which has proven to outperform other designs in high-speed runs. 

The HN airfoils are not as well known as some of the more poplar airfoils but have proven themselves to be very efficient in this application. The HN-354 affords low drag at high speed, while maintaining good lift and docile handling at lower speeds. 

For the speed freak a full carbon, DS version, is available, and so has proven that it is very strong even under the extreme abuse of Dynamic Soaring. The very clean, stiff and sturdy construction gives a very durable airplane

Kit content:
A strong fibreglass fuse with a removable canopy, V-tail pushrod pre-installed, and a ballast tube on the bottom of the fuse below the wings, which can accept over a pound of ballast. Strong hollow core moulded one piece wing that bolts down to the fuselage. The V-tail is a one piece unit that also bolts onto the fuselage. All control surfaces are gapless hinged.  Moulded servo covers, a full inventory of high quality hardware and even an Allen key are included to make a very complete kit. Requires (2 or 4) HS125MG and (2) DS281 servo.

Bart Xtreme std (60" slope racer),
Bart Xtreme with flaps (60" slope racer),
Bart DS, full carbon with flaps (60" slope racer),

Following options and accessories are also available:                                  Bart XE hotliner:

  • Custom paint scheme.
  • Servo package (Volz, Hitec).
  • Carry bag:


Copyright 1997-2014 ICARE enr. All rights reserved.