Home
Back to category
ALES motor chart
EMA power pod
Manta-E
Bart XE
Kalaë
Adriana
Gem
Avionik B-99
Avionik B-2000
Avionik B-2001
Avionik F5B-10 2000
Avionik F5B-7 2001
Alex F5B
Hawk F5B
mini-Hawk F5B
miniCorado F5B
Twister III F5B
Alex-E XXL
Capuccino
Alexis-VE and XE
Gladiator G2-E
Aspire Electro
Xplorer-E 3.5m
Xplorer-E 3.8m
Gracia/Grafas
Topaz SV2-E
Eraser XE
Soarmaster Compact
Magellan-E XL
Magellan-110
Avia
Magellan-E
Falcon-E
Koleos-E
Nelly-E
Mini Nyx-E
Moebius F5/3J mk2
Ocelot-e
Flash-Electro
Linea
Fantasy
 

Eraser XE

Specifications:

 
Wing Span: 3.2 m (124")
Wing Area: 68 dm2 (1054 sq. in.)
Wing Airfoil: MH-32
Flying Weight: 2.2-2.8 kg ( 77-99 oz)
Wing loading: 32 g/dm2 (10.5 oz/sq. ft.)
Radio: Micro servos in the wings
and regular equipment in the fuselage.
Power setup: From 7 to 12 cells, see below.
The Eraser XE is the electric version of the Eraser Xtreme, it features the same construction technology, so it is a pure F3J or TD (thermal duration glider) with great handling.

Hollow core moulded wings with special bottom hinged flaps (for full 90 deg. down flaps) leads to stable approach and accurate landings. The MH-32 Airfoil has a very wide speed range, it's full potential can be obtained when using full flap control over the different flight configuration: a couple of degrees down in thermal turns, a degree reflex in transition. Small changes in camber have substantial changes in behaviour letting you take all the advantages of the current thermal situation. Other particularity are the removable full flying moulded stabs, removable nose cone to ease access for the battery change.

The versatility and it's ease of use will allow aggressive competition flying as well as everyday smooth thermalling.

 


A
s reviewed in S&EM, now Quiet Flyer

Also read review online at ezone.


Kit content:

Colored strong
Kevlar/carbon fuselage, removable nose cone and moulded servo tray. Elevator and rudder carbon pushrods are installed. Hollow core moulded wings are in three pieces. Center panel bolts down to the fuse and tips are connected to the center panel by means of rectangular carbon wing joiner and two locating pins. All moving parts are gapless hinged. Moulded servo cover, Allen keys for the different bolts and hardware are included.

This design was created particularly for the US TD contests, a real landing machine, light and stable. Similar in all aspect to the Xtreme version except it features a fuselage with a special Kevlar/carbon lay-up, to save maximum of weight. The wings feature a hollow carbon spar, very stiff yet very light and with a light wing skin of glass/balsa or Rohacell(Herex)/glass, the wings remain stiff and strong for tuff landings.

Eraser XE, electric Xtrem, light TD version, flat tips, +tail price: 1539.00U$
On sale 1459.00U$
 

Following options and accessories are also available:

  • Custom paint scheme.
  • Servo packages (Hitec, JR, Futaba) and wing servo wire harness.
  • Carry bags.
  • Power setup for Xtreme XE (electric), motor, esc, batteries, inquiry for suggestion!

Power package on 7 cells (FAI/LMR):

  • Plettenberg HP 220/15/A1 P6 7:1

Power package on 10 cells (high performance LMR):

  • Plettenberg HP220/20/A2 P4 7:1

  • Plettenberg HP 220/25/A1 P6 7:1 F5B-10

  • Kontronik FUN500-48 + PG 6.7

Power package on 12 cells

  • Plettenberg HP 220/25/A3 P4 5:1

  • Kontronik FUN500-27 + PG 5.2

  • Plettenberg Ergo

 

 
 
 

© Copyright 1997-2012 ICARE enr. All rights reserved.