Electric Accessories > Brushless Motors > MEGA

Home
Plettenberg
MEGA
Actro motors
AXI - Model motors
Kontronik
MP JET
Typhoon HET-RC
RCer
Specialty Brushless

More informations
Back to category
RC 400/7
RC 400/15
RC 600/20
RC 41/30
ACn 16/7
ACn 16/15
ACn 16/25
ACn 22/10
ACn 22/20
ACn 22/30
ACn 22/45
Selection Chart

 

RC 400/15

 
RC 400/15/5 RC 400/15/5 BS RC 400/15/6 RC 400/15/6 BS
RC 400/15/7 RC 400/15/7 BS RC 400/15/8 RC 400/15/8 BS

These motors are designed especially for direct drive applications. The brushless electromotor with neodym magnets and rotating case gives extremely high torque allowing the use of large diameter and high pitch propellers. It has hardened shaft, which is put inside two ball bearings. Motor is determined for NiCd, NiMH or LI-Pol cells.

Use of electromotor MEGA RC 400/15/series:

- Motor planes (aerobatics planes) up to 0,8 kg.
- Glider with up to 1 kg.
- Bigger PARK FLYER.
- For 3D flying for models up to 500 g.

RC 400/15/5

Specification
Weight 63 g
No load current Io 1.1
Size 28x32.5 φ x L mm
No load 1200 RPM/V
Resistance 41 mΩ
Max. current 15 A
Number of cells 6-8
Max. diameter 28 mm
Recommended propeller From 7" up to 11", for 3D flying 8x4,7, 9x4,7, 10x4,7, 11x4,7 APC
Recommended battery 6, 7, or 8 cells NiCd or NiMH, 2 Li-Pol cells
Ratio 1:1
Diameter of shaft 3.2 mm
Max speed 55 000 revolution/min

RC 400/15/5 BS

Same specifications as the RC 400/15/5, with bothside shaft.

RC 400/15/6

Specification
Weight 63 g
No load current Io 0.9
Size 28x32.5 φ x L mm
No load 1050 RPM/V
Resistance 48 mΩ
Max. current 13 A
Number of cells 6-8
Max. diameter 28 mm
Recommended propeller From 7" up to 11", for 3D flying 8x4,7, 9x4,7, 10x4,7, 11x4,7 APC
Recommended battery 6, 7, or 8 cells NiCd or NiMH, 2 Li-Pol cells
Ratio 1:1
Diameter of shaft 3.2 mm
Max speed 55 000 revolution/min

RC 400/15/6 BS

Same specifications as the RC 400/15/6, with bothside shaft.

RC 400/15/7

Specification
Weight 63 g
No load current Io 0.7
Size 28x32.5 φ x L mm
No load 900 RPM/V
Resistance 67
Max. current 12 A
Number of cells 6-10
Max. diameter 28 mm
Recommended propeller From 7" up to 11", for 3D flying 8x4,7, 9x4,7, 10x4,7, 11x4,7 APC
Recommended battery 10 cells NiCd or NiMH, 3 Li-Pol cells
Ratio 1:1
Diameter of shaft 3.2 mm
Max speed 55 000 revolution/min

RC 400/15/7 BS

Same specifications as the RC 400/15/7, with bothside shaft.

RC 400/15/8

Specification
Weight 63 g
No load current Io 0.5
Size 28x32.5 φ x L mm
No load 800 RPM/V
Resistance 92.5 mΩ
Max. current 10 A
Number of cells 6-10
Max. diameter 28 mm
Recommended propeller From 7" up to 11", for 3D flying 8x4,7, 9x4,7, 10x4,7, 11x4,7 APC
Recommended battery 10 cells NiCd or NiMH, 3 Li-Pol cells
Ratio 1:1
Diameter of shaft 3.2 mm
Max speed 55 000 revolution/min

RC 400/15/8 BS

Same specifications as the RC 400/15/8, with bothside shaft.

 
 
 
 

© Copyright 1997-2011 ICARE enr. All rights reserved.